Start Auto Setup procedure
Important note:
Ensure that the aerial is connected and a Common Interface
module is not inserted before switching on the TV for the first time installation.
Do not insert a common interface module during the search process.
1.
When the TV is turned on for the first time the language screen will
be displayed. Select the desired language using
Up
or
Down
button and press
OK
to save and continue.
2.
After setting the language, First Time Installation screen wil be
displayed. Use
Up/Down
and
Left/Right
buttons to set the
desired options
.
HDMI input
PLEASE ENSURE BOTH UNITS ARE SWITCHED OFF BEFORE
CONNECTING. Use a HDMI to HDMI cable to connect the two units together.
To select the HDMI input, press the
“SOURCE”
button on the remote control.
Each time it is pressed the on-screen menu confirms your selection.
6
5
3.
“Do you want to start automatic search?" message will be
displayed on the screen. Select YES and press OK to continue.
The TV will search for digital terrestrial broadcasts.
After all the
available stations are stored, Channel List will be displayed on the
screen. If you like to sort channels, according to the LCN(*), please
select “Yes” and then press OK. (*) LCN is the Logical Channel
Number system that organizes available broadcasts in
accordance with a recognizable channel sequence.
50345148
SOURCE
SOURCE
To HDMI connection on
the device
