Page 7
DRC ( Dynamic Range Control )
This causes the radio to reduce the dynamic range of
the audio signal. The purpose of this is to adapt the
dynamic range of the audio signal to listening in a noisy
environment.
NOTE: this is not available on many DAB stations.
1:
Press and hold the
MENU
button
(8)
.
2:
When the
<Station List>
option appears press either
TUNE UP (4)
or
DOWN (3)
button to locate the
<DRC>
option . Press the
SELECT
button to select .
3:
Choose between
DRC
off,
DRC
Low and
DRC
High
using the
TUNE UP (4)
or
DOWN (3)
buttons .
4:
Press
SELECT
to save the setting .
FM operation
Press the MODE button (9) (if in DAB mode) to switch
to FM mode. The display will show ‘FM’.
FM
87.50MHz
All the best t
0 8: 4 2
Tuning an FM station
1:
Press and hold either
TUNE UP (4)
or
DOWN (3)
button to scan up or down the frequency range . When
a station is found the scan will stop and play the
found station .
3:
You can fine tune the frequency by pressing either
TUNE UP (4)
or
DOWN (3)
button to advance
0
.
05MHz
with each press .
Scan mode
This function allows you to tailor which stations will be
detected when performing a scan.
1:
Press and hold the
MENU
button
(8)
.
2:
When the
<Scan setting>
option appears the
SELECT
button to select .
Scan mode (cont)
3:
Use the
TUNE UP (4)
or
DOWN (3)
buttons to select
from
<Strong stations only>
or
<All stations>
.Strong
stations only, will only stop at stations with a strong
signal . All stations will stop at any station found with a
strong or weak signal .
4:
Make your choice by pressing the
SELECT
button to
activate the setting .
Audio mode (STEREO/MONO)
Denotes if the broadcast is in Stereo or Mono.
To specify that a station can be only played in mono or
that stereo is allowed.
1:
Press and hold the
MENU
button
(8)
.
2:
When the
<Scan setting>
option appears press either
TUNE UP (4)
or
DOWN (3)
button to locate the
<Audio
setting>
option . Press the
SELECT
button to select .
3:
Use the
TUNE UP (4)
or
DOWN (3)
buttons to cycle
through the two options
<Forced Mono>
or
<Stereo
Allowed>
. Press
SELECT
to select .
Stereo allowed:
Means any station broadcast in stereo
with a strong enough signal will be played in stereo .
Mono only:
Plays ALL stations in mono regardless of the
availability of a stereo signal .
Storing FM station presets
It is possible to store up to 10 of your favourite DAB
stations. This will enable you to access your favourite
stations quickly & easily.
1:
To store a preset, you must first be listening to the
station that you would like to save, press and hold the
PRESET
button
(7)
for
2
seconds . The
LCD
will then
show the following .
Preset Store
< 1: (Empty) >
0 8: 4 2
FM
2:
Use the
TUNE UP (4)
or
DOWN (3)
buttons to choose
the preset number from
1
-
10
you wish to use . Then
press the
SELECT
button to store .
User instructions
