Bush CBB193MP3BLK, Instruction Manual

Page: 22 / 32

Using your Boombox
Let’s get started
Using your Boombox
22
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Skipping tracks on a CD/MP3CD
1.
Skip to the next track on a disc by pressing the button (11).
2. Skip to the previous track by pressing the button (5).
3. To skip 10 tracks at a time press the PROG./ 10+ button (6).
Fast searching tracks CD/MP3CD
1. To fast forward a track during playback press and hold the button (11).
2.
To fast rewind a track during playback press and hold the button (5).
Programmed playback CD
1. Press the STOP button (4) to stop playback (if required).
2.
Press the PROG./10+ button (6) once. The program sequence “P01” flashes on the LED
display and the PROGRAM indicator (7) will flash.
3. Select the first track to be programmed using the / buttons (11, 5) buttons.
4. Press the PROG./10+ button (6) again to store and advance to the next programmed
track. The program sequence indication changes to “P02” waiting for your next input.
5.
Repeat the steps above to program more tracks. A maximum of 20 tracks for CD and
99 tracks for MP3CD can be programmed.
The letters ‘FUL’ will appear on the display when no more tracks can be added to the
program sequence.
6. Press the PLAY/PAUSE/PWR button (12) to begin the programmed playback in the
preferred order. The PROG. indicator (7) will illuminate.
7. Press the STOP button (4) to stop playback. In program STOP mode, press the STOP
button again to clear the programmed sequence or press the
PLAY/PAUSE/PWR
button (12) to begin the programmed playback again.