Bush BUCF6082, Instruction Manual

Page: 24 / 40

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions.
24
Functions
Simple everyday use
Functions
Thermostat setting
The freezer thermostat automatically regulates the
temperature inside the compartments.
Cooler temperatures can be obtained by
rotating the knob to a higher number (1
to 5). The “•” position closes the
thermostat so no cooling will take place.
Important note: Do not try to rotate knob
beyond position 1. It will stop your appliance
from working.
Freezer thermostat settings:
1 - 2 :
For short-term storage of food in the freezer
compartment.
3 - 4 : For long-term storage of food in the freezer
compartment.
5 : For freezing fresh food. The appliance will
run at colder temperatures.
Temperature Adjustment Warnings
• The ambient temperature, temperature of
the freshly stored food and how often the
door is opened affects the temperature in the
freezer compartment. If required, change the
temperature setting.
• It is not recommended that you operate your
freezer in environments colder than 10°C in
terms of its efficiency.
• When setting the thermostat, take into
consideration how often the appliance door is
opened and closed, how much food is stored
in the freezer, and the environment in which
the freezer is located.
• When the appliance is first switched on,
allow it to run for 24 hours in order to reach
operating temperature. During this time, do
not open the door and do not keep a large
quantity of food inside.
• Unplug your appliance during a power cut
to prevent damage to the compressor.
Once power is restored, delay plugging in
your appliance for 5 to 10 minutes. This will
help prevent damage to the appliance's
components.
• Your appliance is designed to operate in
the ambient temperature ranges stated in
the standards, according to the climate
class stated in the information label. It is not
recommended that your freezer is operated
in the environments which are outside of the
stated temperature ranges. This will reduce
the cooling efficiency of the appliance.
• Your appliance is designed to operate in the
ambient temperature (SN = 10°C - 32°C)
intervals stated in the standards, according to
the climate class displayed on the information
label. We do not recommend operating your
appliance out of the stated temperature limits
in terms of cooling effectiveness.
Climate
Class
Ambient Temperature o C
T Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N Between 16 and 32 (°C)
SN Between 10 and 32 (°C)