Bush BT-751, Instruction Manual

Page: 16 / 32

16
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Using your Bluetooth speaker
Using your Bluetooth speaker
Let’s get started
Power on
Long press the Power button on the top of your product, next to the large rotary volume
control. A tone will sound and the blue LED ring on the top of the product, at the base
of the rotary volume control, will flash quickly whilst your product searches for Bluetooth
devices.
Standby mode
If the Bluetooth speaker does not receive an audio signal for approximately 15 minutes it
will go to Standby mode and the blue LED ring will flash slowly. Press and hold the Play/
Pause button to turn the product back on again. Alternatively you can long press the
power button to turn the product off, then long press the power button again to turn the
product on again.
Power o ff
Long press the Power button on the top of your product to turn the speaker off.
Connect to a Bluetooth device
1.
The blue LED ring on the top of the product, at the base of the rotary volume control,
will flash quickly whilst your product searches for Bluetooth devices.
2. On the device that you would like to connect to your Bluetooth speaker via Bluetooth
(e.g. iPhone/iPad/Android/other phone/Tablet/Computer), turn on Bluetooth
connectivity and ensure that it is ‘discoverable’.
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. When found, your Bluetooth speaker will be displayed as ‘BUSH Speaker’. Select the
device name to begin pairing.
Note: If your device requests a password, please enter ‘0000’ to complete the device
pairing.