BUSH BR30DABAM
BUSH BR30DABAM
10
11
SCANNING AND STORING STATIONS
Please Note:
with a DAB+ radio, it’s a good idea to conduct a station scan every now and then
to make sure that you have the most up to date station list stored in the memory of your radio. As
new stations are often added or replaced
In DAB+ Mode, press the SCAN Button to activate a full station search. The radio will begin
automatically and will store all available stations. A bar graph will show searching and will indicate
the number of stations found and the scan progress.
You may see some symbols displayed alongside the stations names. These are defined as follows:
■
? - This will indicate that the station is not active or available
■
>> - This symbol indicates that the station is a primary station with secondary services
■
<< - This symbol indicates that the station is secondary station
STATION PRESETS
The
Bush BR30DAB AM Radio
allows you to set up to 10 Station Presets. This means you can
easily access all of your favourite stations at a touch of a Button.
1. To store a station preset, you must first tune to the station you wish to set as a preset.
2. Then press and hold PRESET Button. ‘Preset Store’ will appear on the second line of the display.
Use the NAVIGATION buttons (
t
and
u
) to select your preset number between 1 & 10. Press
the SELECT button to lock in the station.
3. If you have already saved a station in that preset position the new selection with override the
previous station saved.
PLAYING A PRESET STATION
1. To play a stored preset just press the PRESET button
2. Press NAVIGATOR Buttons (
t
and
u
) to find the stored preset station, then press SELECT
button.
3. If you have not stored a station in the Select preset, ‘Empty preset’ will be displayed. The display
will revert to the previously selected station after a few seconds.
RESETTING PRESET STATIONS
You can delete all of the preset and return the DAB+ digital radio to its factory settings.
1. Press and hold the MENU button.
2. The display with show ‘Press SELECT to confirm reset...’
3. Press the SELECT button. The display will show ‘Welcome to DAB’ before performing a new
scan for stations. The DAB+ digital radio will be returned to its factory condition.
4. If you pressed and held the MENU button and you do not wish to reset the DAB+ radio, wait a
few seconds without pressing any buttons and it will revert to its previous operation condition.
VIEWING STATION INFORMATION
While listening to a DAB+ station you can view the station information provided by the broadcaster.
To view the information press the INFO button repeatedly to scroll through the information
provided.
Dynamic Label Segment (DLS)
: DLS is the scrolling text information supplied by the DAB+
station or by the broadcaster.
Program Type (PTY)
: This is a description of the type of program provided by the DAB+ station
or by broadcaster.
Multiplex Name
: This will show the multiplex that is broadcasting the program you are listening to.
Time and Date
: This will display the time and date and is provided by the broadcaster.
Channel and Frequency
: This is the transmission frequency of the station you are listening to.
Signal information
: Shows the digital bit rate and signal mode.
Signal Strength
: Shows a signal bar with the strength of the current station you are listening to.
The indicator on the signal bar shows the minimum acceptable signal level.
Stations with signal strength below the minimum signal level will not provide a steady stream of
audio.
DAB+ MENU OPTIONS
The MENU button allows you to change some of the system option on your DAB+ digital radio.
Pressing the MENU button will enter the MENU control.
