Bush BLSINDH60, Instruction Manual

Page: 14 / 38

Installing your Built-in Hob
Bringing it all together
Installing your Built-in Hob
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Installation requirements
•
IMPORTANT: CONTACT AN
AUTHORISED SERVICE AGENT FOR
INSTALLATION OF YOUR HOB!
Data Label
The Data Label is located on the bottom of the
appliance.
Unpacking
Carefully unpack and examine the appliance for any
damage. If you think there is a defect, do not use
the appliance and contact Product Support on
01759 487838.
Packaging materials should be collected together
and disposed of immediately as they may be
harmful to children.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Induction cooking is a safe, advanced,
efficient, and economical cooking
technology. It works by
electromagnetic vibrations generating
heat directly in the pan, rather than
indirectly through heating the glass
surface. The glass becomes hot only
because the pan eventually warms it
up.
Before using your New Hob:
•
Read this guide, taking special note of the ‘Safety Warnings’ section.
• Remove any protective film that may still be on your Induction hob.
Iron Pot
magnetic Circuit
ceramic glass plate
induction coil
induced currents