PROBLEM
REMEDY
POSSIBLE CAUSE
No sound
The unit does react to
operation of any button
Poor radio reception
No sound from
iPhone/iPod
Volume not adjusted.
Mains adaptor is not
correctly connected.
Microprocessor locked up.
Weak radio signal.
Interference from other
electrical items.
Incorrect mode selected.
IPhone/iPod not
connected correctly.
Adjust the volume.
Connect the mains
adaptor properly.
Turn off the unit,
disconnect the mains
adaptor, reconnect after a
few seconds.
Ensure the wire antenna is
fully extended.
Adjust the position of the
antenna.
Move the radio away from
sources of interference.
Select iPod mode.
Reconnect the iPhone/iPod.
IMPORTANT:
Due to continual revision and improvements to our products
design, specifications are subject to change without notice.
BCR26DABIP
21
Troubleshooting
Technical Specification
Model Number
Power Supply
Standby Power Consumption
Max Power Consumption
Max Power Output
10% THD Power Output
FM section
DAB section
Battery
BCR26DABIP
AC Adapter
INPUT 240V 50Hz
OUTPUT 5V 2A
Below 2W
10W
1.5W
1.2W
Band III, 174 MHz to 240 MHz
87.5 MHz to 108 MHz
Backup Battery CR2032 x 1 pcs
