Bush BC-310D, Instruction Manual

Page: 4 / 8

Power adaptor
Connect the power adaptor supplied into a mains socket then connect the adaptor to the
power in socket on the back of the speaker. Make sure the mains power socket is switched on
then press the Power key (4) on the top of the speaker housing.
Pairing your speaker with Bluetooth enabled mobiles and tablets
1. Place the speaker and mobile/tablet within 3 metres of each other. Turn on the speaker
using the power switch (4) on the back of the speaker, the LED will flash blue, the speaker
is ready to pair.
2. Select the Bluetooth function on your mobile and search for Bluetooth devices, the
speaker will appear as “BC310” in the Bluetooth device list select and pair.
3. Connection will normally be automatic if a password is required enter (0000).
After successful pairing, select “BC310” in the Bluetooth device list, and press “connect”.
After successful connection, LED changes to continuous blue.
Please Note:
1. If the pairing is not successful, turn off the speaker and try pairing again.
2. After successful pairing, paired devices will remember each other.
Unless pairing information is deleted, pairing should be automatic when both devices are
switched on in range of each other.
3. To pair with a new device follow steps 1-3 above after disconnecting the existing pair.
Pairing your speaker with iPhone/iPad
Place the speaker and your iPhone/iPad within 1 metre of each other.
Turn on the speaker, the LED will flash blue, the speaker is ready to pair. In iPhone/iPad
General menu go to Bluetooth, tap on Bluetooth function, search the Bluetooth devices, tap
“BC310” to connect.
Pairing your speaker with a PC /laptop Mac running OS X 10 or above
To pair to a PC or Mac follow the same procedure as for a phone or tablet.
After pairing to a Mac you will need to open System Preferences, click on Sound, click Output
and select the Bluetooth speaker. Then click Input and
select your speaker. Adjust the Input and Output volume to suit. “Show
Bluetooth status in the menu bar” checkbox. During the pairing process, if you are asked for a
password enter (0000).
Re-connecting to a paired device
Each time the speaker is turned on, there are two possible outcomes.
The speaker will connect automatically to the last connected device, just press play
for playback.
The speaker will be listed on your devices screen of as an available output channel, select the
speaker as the output channel and play your music.
Bluetooth Pairing
4
FM Radio with Bluetooth | Instruction Manual