Bush AG66DA Operating Instructions Manual Download Page 5

Safety Information

- WARNING: Ensure that the 
appliance is switched off before 
replacing the lamp to avoid the 
possibility of electric shock.  
- CAUTION: Accessible parts may be 
hot when the cooking or grilling is in 
use. Young children should be kept 
away.

• Your appliance is produced in accordance with
all applicable local and international standards and 
regulations.
• Maintenance and repair work must be made only
by authorized service technicians. Installation and 
repair work that is carried out by unauthorized 
technicians may endanger you. It is dangerous to 
alter or modify the specifications of the appliance 
in any way.
• Prior to installation, ensure that the local
distribution conditions (nature of the gas and gas 
pressure or electricity voltage and frequency) and 
the requirements of the appliance are compatible. 
The requirements for this appliance are stated on 
the label.
• CAUTION: This appliance is designed only for
cooking food and is intended for indoor domestic 
household use only and should not be used for 
any other purpose or in any other application, 
such as for non-domestic use or in a commercial 
environment or room heating.
• Do not try to lift or move the appliance by pulling
the door handle.
• This appliance is not connected to a
combustion products evacuation device. It shall 
be installed and connected in accordance with 
current installation regulations. Particular attention 
shall be given to the relevant requirements 
regarding ventilation. 
• If after 15 s the burner has not lit, stop operating
the device and open the compartment door 
and/or wait at least 1 min before attempting a 
further ignition of the burner. 

• These instructions are only valid if the country
symbol appears on the appliance. If the symbol  
does not appear on the appliance, it is necessary 
to refer to the technical instructions which will 
provide the necessary instructions concerning 
modification of the appliance to the conditions of 
use of the country.

• All possible security measures have been taken
to ensure your safety. Since the glass may break, 
you should be careful while cleaning to avoid 
scratching. Avoid hitting or knocking on the glass 
with accessories.
• Ensure that the supply cord is not wedged
during the installation. If the supply cord is 
damaged, it must be replaced by the 
manufacturer, its service agent or similarly 
qualified persons in order to prevent a hazard.
• While the oven door is open, do not let children
climb on the door or sit on it.

Installation Warnings

• Do not operate the appliance before it is fully
installed.
• The appliance must be installed by an
authorized technician and put into use. The 
producer is notresponsible for any damage that 
might be caused by defective placement and 
installation by unauthorized people. 
• When you unpack the appliance, make sure
that it is not damaged during transportation. In 
case of any defect; do not use the appliance and 
contact a qualified service agent immediately. As 
the materials used for packaging (nylon, staplers, 
styrofoam...etc) may cause harmful effects to 
children, they should be collected and removed 
immediately. 
• Protect  your  appliance  against  atmospheric
effects. Do  not expose  it to  effects such as sun, 
rain, snow etc. 
• The  surrounding  materials  of  the  appliance
(cabinet) must be able to withstand a temperature 
of min 100°C. 

During usage  

When you first run your oven a certain smell will

emanate from the insulation materials and the 
heater elements. For this reason, before using 
your oven, run it empty at maximum temperature 
for 45 minutes. At the same time you need to 
properly ventilate the environment in which the 
product is installed.
• During usage, the outer and inner surfaces of
the oven get hot. While opening the oven door, 
step back to avoid the hot steam coming out of 
the oven. There may be a risk of burns.
• Do not put flammable or combustible materials, in
or near the appliance when it is operating.
• Always use oven gloves to remove and replace
food in the oven.

4

Important - Please read these instructions fully before installation

Customer Helpline 

0345 257 7271

Summary of Contents for AG66DA





















Reviews: