Bush 8914332, Instruction Manual

Page: 27 / 52

Blue Stretch:
Changes white balance of mid-high grey
levels to cooler colour temperature. Blue Stretch can
be switched
On or Off .
Game Mode: Game Mode can be switched On or Off .
PC Mode: PC Mode can be switched On or Off .
HDMI RGB Range (HDMI input only):
Sets correct
interpolation method for HDMI input signals. HDMI RGB
Range has 3 different settings;
Auto , Full , Limit . The
default setting is Auto . Highlight your desired setting
then press
Select
.
HDMI Input Mode (HDMI input only):
HDMI Input
Mode has 4 different settings; Mode 1 (1.4) , Mode 2
(2.0) , Auto , Reset . The default setting is Auto . Highlight
your desired setting then press
Select
.
Dolby Vision Notification:
Dolby Vision notifications
can be switched On or Off . Notifications are switch on
as default.
Reset to Default:
Resets all settings to factory default
settings.
Adjusting the Sound Settings
Allows you to adjust the sound settings on your TV. You
can access the sound settings menu via the
Settings
menu on the main screen or by pressing and holding
the
Home button for 2 seconds while viewing any input.
Accessing Sound Settings via Settings Menu
Press the
Home
button, scroll to
Settings
tab and press
the Select button. Scroll to Display & Audio option and
press the Select button. Scroll down to Sound Settings
option and press the
Select
button. The sound setting
options will appear on the right hand side of the screen.
Accessing Sound Settings while watching the TV
While watching the input that you would like to adjust
press and hold the
Home button for 2 seconds. The
quick settings menu will appear on the right hand side of
the screen. Scroll down and highlight
Sound then press
Select . The sound setting options will appear on the right
hand side of the screen.
Sound Menu Content
The following options show all the available sound setting
adjustment on your TV.
Dolby Audio:
Dolby Audio has preset sound settings.
The default setting is Smart . The settings are Film , News ,
Music , Smart and Off . They are designed to give you the
best sound quality for the content that you are viewing. If
you select
Smart this will automatically detect the content
you’re watching and adjust the audio settings accordingly.
Highlight your desired setting then press
Select
.
Sound Mode:
Sound Mode can only be accessed if
you have switched off Dolby Audio . Sound Mode has
6 different settings: Standard , Music , Film , Clear Voice ,
Enhanced Bass , Flat . The default setting is Standard .
Highlight your desired setting then press
Select
.
Equaliser: This setting can only be accessed once Dolby
Audio has been switched off. Equaliser has 5 different
settings: 100Hz , 500Hz , 1.5kHz , 5kHz , 10kHz . Each
setting can be adjusted from -10 to 10, the default setting
is 0 for all.
Balance: Adjusts the sound level from the left and right
speakers and can be adjusted from -25 to 25. The default
setting is 0.
Advanced Settings:
Advanced Settings can only be
accessed if you have switched off Dolby Audio . Here
you will be able to switch Dialog Clarity , DTS Virtual:X ,
TruVolume
and
TruBass
on or off. Highlight the desired
option and press Select to switch on or off.
Dialog Clarity: Enhances signal clarity for clear dialogue
that is audible above background sound effects.
DTS Virtual:X:
Reproduces elevated sounds and a
cinematic surround sound image without surround
speakers.
TruVolume: Provides a consistent and comfortable
volume level across content.
TruBass:
Manages and enhances bass sound.
TV Speakers:
Press
Select
to switch the TV speaker
On
or Off .
Reset: Resets all settings to factory default settings.
To Program Your SKY Remote For Your
TV
1.
Make sure your SKY box is connected to your TV
2. Turn your TV and SKY box on
3. Press TV on your SKY remote control handset
4. Hold down SELECT and the RED button together
for about two seconds, until the red light on the SKY
remote blinks twice.
5. Key in 0808 on your SKY remote. The light on the SKY
remote should blink twice
6. Press the STANDBY button on your SKY remote
control. Your TV should now switch off.
7.
Press SELECT again. The light on your SKY remote
control should now blink twice
You should now be able to control some basic functions
on your TV from your SKY remote control (e.g. volume
up/down, programme up/down).
Advanced features
Getting the most from your TV
Advanced features 25
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the
Help Menu
,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
BUSH
I
firetv
'
�,