Bush 856B, Instruction Manual

Page: 4 / 5

OPERATION OPERATION
Bluetooth operation
Bluetooth Pairing
1). Press and hold the Power
Switch ( 1 )
for 2 seconds to turn on the
power. The blue light next
topower switch
will be flashing and indicator
sound will be announced to
indicate that the unit is
ready for pairing. (fig.3)
2
). Turn on the bluetooth mode
ofthe paired device, then
search for BUSH 856B for
pairing.
3). After pairing, you can start to
enjoy the music from the
paired device.
4). Remember to press the
Power Switch ( 1 ) for 2
seconds to turn off the
speaker when the speaker is
not used. Then the blue light
next to the power switch ( 1 )
will be off This will ensure
the bluetooth speaker can be
connected to another paired
device by repeating the
above procedure even if the
initially paired device has not
been disconnected. (fig. 4)
Play Music
1
). Vol - / previous song button (
2)
Press briefly will decrease
volume of the speaker .
Press constantly will instruct
the paired device to play the
previous song . ( fig . 5 )
2). Pause / Play ( 5 )
Press briefly will instruct the
paired device to stop
playing the song temporarily .
Press briefly again to instruct
the paired device to play the
song again from the stopped
position . ( fig . 6 )
3 ). Vol + / next song button ( 3 )
Press briefly will increase
volume of the speaker .
When the volume reach
maximum level , there'll
be an indicate sound to show
the speaker reach maximum
level .
Press constantly will instruct
the paired device to play the
next song . ( fig . 7 )
fig . 3 fig . 4
fig . 5
fig . 6
fig . 7
If the paired device is a mobile
phone , y ou can use the
bluetooth speaker as a
handsfree answering device
for the paired mobile phone :
1
)
When there's an incoming call
Handsfree phone answering
Splashproof Speaker Instruction Marua 05 Splashproof Speaker Instruction Marua 06