3
Where to put your radio
It is important that you consider carefully in advance where your radio will be situated
and make sure that it is:
on a lat and stable surface
•
within 1�8 metres of a power socket
•
where you can fully extend the telescopic aerial
•
away from bright sunlight or heat sources, such as a radiator
•
not in a humid or very damp place such as a bathroom
Setting up
1� Connect the mains power lead into the socket on the bottom left of the back
of the radio and fully extend the radio aerial in a vertical position to obtain the
maximum signal strength�
Note: Only use the power supply provided� Using an unauthorised power supply
will invalidate your guarantee and may damage your radio�
2� Plug the power adaptor into the mains power wall socket and switch on�
‘Welcome to Digital Radio’ will be displayed�
3� Press and release the ‘Power’ button on the front of the radio� The irst time you
switch your radio on it will automatically begin to scan for DAB radio stations� A
progress bar will show the progress of the scan and the number of stations found
during the scan will also be displayed� When the scan is complete your radio will
select the irst available station and begin to play� Stations are listed in numerical
and then alphabetical order by default�
4� Note: The DAB radio station list is stored in the memory and so the next time you
switch your radio on, the station search does not take place� It is possible to scan
manually for stations� Please see page 6�
5� Inserting the batteries (optional)� Before installing the batteries (not included)
please ensure that the Radio is unplugged from the mains power supply�
6� On the back of the radio, push the two tabs on the battery compartment down
and remove the battery cover� Insert 4 x 1�5V LR14 C-size batteries, making sure
to note the ‘+’ and ‘-‘ markings and position the batteries the correct way around�
Replace the battery cover, making sure it ‘clicks’ shut�
Note: For battery operation, please switch of the mains adaptor and remove the
mains power plug from the back of the radio�
Product Set Up
