Bush 134250099, Instruction Manual, Page: 14 / 32

Getting to know your DVD Player
You’ll be up and running in no time
Getting to know your DVD Player
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Making the connections
HDMI cable connection to the TV
HDMI cable (not supplied)
An HDMI cable connection carries uncompressed
high speed video, audio and other digital information
in 100% digital form. It enables transmission of crystal-
clear digital video, multi-channel surround audio, and
advanced control data through a single cable.
Connecting your DVD player to a TV with an HDMI
cable:
SCART cable connection to the TV
SCART cable (not supplied)
A scart cable connection will carry both video and
audio and will provide you with good picture quality,
widescreen switching and stereo audio.
Connecting your DVD player to a TV with a SCART
cable:
H DMI
S C A R T O U T
DC 5 V, 1 . 5A
L
R
C V B S
WARNING: HIGH VOLTAGE INSIDE.TO PREVENT
ELECTRICAL SHOCK DO NOT REMOVE ANY COVER
OR SCREW. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL. DO NOT ALLOW THIS
PRODUCT TO BE EXPOSED TO RAIN OR
MOISTURE. DISCONNECT THIS MAINS PLUG FROM
THE SUPPLY SOCKET WHEN NOT IN USE.
HDMI IN
Fig 27.
Fig 28.
H DMI
S C A R T O U T
DC 5 V, 1 . 5A
L
R
C V B S
WARNING: HIGH VOLTAGE INSIDE.TO PREVENT
ELECTRICAL SHOCK DO NOT REMOVE ANY COVER
OR SCREW. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL. DO NOT ALLOW THIS
PRODUCT TO BE EXPOSED TO RAIN OR
MOISTURE. DISCONNECT THIS MAINS PLUG FROM
THE SUPPLY SOCKET WHEN NOT IN USE.
RCA cable connection to the TV
Using the RCA cable (supplied), the red and white
plugs should be connected to the audio left and right
channels. The yellow plug should only be connected
to the video CVBS socket.
Note: When using this type of RCA plug and socket
connection, they are always colour coded e.g. red
plug to red socket etc.
Installing the remote batteries
1. Press down the tab on the remote control battery
door, in the direction of the arrow, to remove it.
2. Insert the 2 x AAA batteries supplied, taking care to
the
+ and - markings and position the batteries the
correct way around.
3.
Replace the battery cover, making sure that it
‘clicks’ shut.
H DMI
S C A R T O U T
DC 5 V, 1 . 5A
L
R
C V B S
WARNING: HIGH VOLTAGE INSIDE.TO PREVENT
ELECTRICAL SHOCK DO NOT REMOVE ANY COVER
OR SCREW. REFER ALL SERVICING TO QUALIFIED
SERVICE PERSONNEL. DO NOT ALLOW THIS
PRODUCT TO BE EXPOSED TO RAIN OR
MOISTURE. DISCONNECT THIS MAINS PLUG FROM
THE SUPPLY SOCKET WHEN NOT IN USE.
L
R
Video
Fig 29.
AAA
+
-
AAA
+
-
Fig 30.