Bush Hog TOUGH CBX48, Operator'S Manual, Page: 8 / 14

Figure 1
DURING BLADE ADJUSTMENT
KEEP BODY, HANDS AND FEET CLEAR
OF BLADE
ATTACHMENT
The box blade should be placed on level ground.
Place the tractor rockshaft control in “position con-
trol” (non-floating) for attaching and detaching the
rear mounted blade. “Draft control” or “position con-
trol” can be used while operating.
Back the tractor until the ends of the lift arms can be
attached to the lift pins on the implement.
Attach the center link to the top of the mast and
adjust so that the blade frame will be level in the
operating position.
DETACHING FROM TRACTOR
Lower the blade to the ground with rockshaft control
in position control. Remove top link from mast, dis-
connect hitch arms from bottom pins and pull tractor
away from blade.
SECTION I
OPERATION
NOTE: Hitch pins can be mounted extending
toward the outside or center of the implement to
fit different tractor lift arms.
Secure the lift arms
to the pins. (Figure 1)
6
WARNING
MODEL CBX-48 CBX-60
Working Width
48” 60”
Moldboard Height
11-1/2” 11-1/2”
Box Depth
12-3/8” 12-3/8”
Overall Depth
17-3/4” 17-3/4”
Overall Height
29-3/8” 29-3/8”
Overall Width
48-1/2” 60-1/2”
Side Sheet Thick.
3/16” 3/16”
Scarifier Size
5/8” x 2-1/2” 5/8” x 2-1/2”
Scarifier Teeth
4 4
Hitch
Category 1 Category 1
Lower Hitch
Cat 1 Pin Cat 1 Pin
Cutting Edge
3/8” x 6” 3/8” x 6”
Number of Blades
2 2
Approx. Weight
240 lbs. 280 lbs.
Tractor HP
24 (Maximum) 24 (Maximum)
SPECIFICATIONS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE