MS250G, MS500G, MS800G, MS500P, MS800P
Compact Manure Spreader
Introduction
5
01373
RETAIL CUSTOMER’S RESPONSIBILITY
UNDER THE BUSH HOG WARRANTY
It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to operate, lubricate,
maintain, and store the product in accordance with all instructions and safety procedures. Failure of the opera-
tor to read the Operator’s Manual is a misuse of this equipment.
It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have any part(s) repaired
or replaced when continued operation would cause damage or excessive wear to other parts or cause a safety
hazard.
It is the Retail Customer’s responsibility to deliver the product to the authorized Bush Hog dealer from whom he
purchased it, for service or replacement of defective parts which are covered by warranty. Repairs to be submit-
ted for warranty consideration must be made within forty-five (45) days of failure.
It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to or hauling of the
product for the purpose of performing a warranty obligation or inspection.
2. Introduction
2.1 Serial Number Location
Always provide the model and serial number of your Bush Hog
product when ordering parts, or requesting service or other
information. The product information plate location is shown in
the following illustration.
Record the Model and Serial Number of your equipment in
the spaces provided below for future reference.
Fig. 1 –
Serial Number Plate Location (Typical)
Record Product Information Here
Model:
Serial Number:
Summary of Contents for MS250G
Page 44: ...BUSH HOG...