Bush Hog HT625H, Operator'S Manual

Page: 48 / 76

OPERATION
HT625H 03/19 Operation Section 4-8
© 2019 Alamo Group Inc.
OPERA
T
ION
6.1 Connecting Hay Tedder to Tractor
The attachment of pull-type machines to the tractor is very simple, as it is only necessary to couple the
drawbar hitch (3) to the tractor hitch using a pin of appropriate size, strength and shape. Always use extreme
care when reversing the tractor towards the machine.
The drawbar hitch (3) can be set in different positions, using pin (4) turning the hitch upside-down from (A) to
(B), to allow coupling to all tractor types.
If the two-point crosspiece is used, lock the drawbar hitch (3) using the optional screws (10).
NOTE: Do Not use screws (10) if the machine is hitched to the drawbar.
During transport and working the parking stand (7) must be shifted from “N” to position “K”. This is done by
removing clip (9) and pin (6) and moving stand (7) out f the parking position. Fasten parking stand (7) into the
transport position using pin (6) and clip (9). Once this procedure is completed, insert the quick-release coupling
into the tractor socket.