NE122SS
STAINLESS STEEL
IN POOL LADDER
ASSEMBLY
AND
INSTALLATION INSTRUCTIONS
Page 1: ...NE122SS STAINLESS STEEL IN POOL LADDER ASSEMBLY AND INSTALLATION INSTRUCTIONS ...
Page 2: ...SCRIPTION 2 BS SSRAIL STAINLESS STEEL HAND RAIL 4 NEP2043 LADDER STEPS 2 NEP2048 PIVOT BALLS FOR BASE STEP 1 NEP2044 BOTTOM STEP 1 NEP2042 HARDWARE BAG 2 BS35998 PLASTIC FLANGES WHITE PARTS LIST STEP 1 Unpack box and check parts against parts list below BS SSRAIL NEP2043 ...
Page 3: ...rail Align the holes in the step with the top set of holes on the handrail Secure step to handrail with a bolt and nut Make sure that the head of the bolt is located on the outside of the step See figure 2 Slide the second handrail thru the hole on the opposite side of the step Secure with a nut and bolt See figure 2 Slide the remaining 3 steps onto the handrails and secure them with nuts and bolt...
Page 4: ...Figure 6 STEP 6 Ladder Placement Figure 6 Locate ladder in desired position on deck A Make sure base step rests flat against the pool floor Swivel step if needed to align with pool floor B Mark location of handrails on deck with a pencil Using a 1 1 2 hole saw drill 1 hole for each hand rail through deck surface C This will ensure that the deck will now support the ladder Secure hand rails to deck...
