![background image](http://html1.mh-extra.com/html/bush-hog/bh100-series/bh100-series_operators-manual_2834788107.webp)
OPERATION
BH100 Series
04/21 Operation Section 4-9
© 2021 Alamo Group Inc.
OPERA
TION
5.1 Connecting the Mower
1.
Make sure the tractor is equipped with the
correct PTO shaft. Change shafts if needed.
2.
Shorten or remove the tractor drawbar to avoid
interference when raising and lowering the
mower.
3.
Board the tractor and start the engine. Position
the tractor to the mower with the 3-point lift
arms positioned at the same height and to the
outside of the mower hitch pins.
NOTE:
Set the 3-point lift control to “Position
Control” so that the lift arms maintain a constant
height when attaching the mower. See the
tractor Operator’s Manual for correct settings
when attaching 3-point equipment.
4.
Turn off the tractor engine and dismount.
5.
One lift arm at a time, align arm end hole
between the set of A-frame lift lugs. Insert hitch
pin through the lug and arm holes and insert
retaining pin into hitch pin.
6.
Walk around to opposite side and repeat
procedure for remaining lift arm and hitch pin.
7.
Extend or retract 3-point top link to align its end
hole with the holes of the mower’s top link.
Insert the top link hitch pin and insert retaining
pin into hitch pin.
8.
Adjust any lower link check chains, guide
blocks, or sway blocks to prevent the mower
from swaying side to side and possible contact
with tractor rear tires.
5. CONNECTING THE MOWER TO THE TRACTOR
Use extreme caution when connecting the mower to the tractor. The mower should be securely resting at
ground level or setting on blocks. Keep hands and feet from under the mower deck and clear of pinch points
between the tractor hitch arms and mower pins.
OPS-R-0001
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
(S3PT-15)
D
AN
G
E
R
Summary of Contents for BH100 Series
