Bush Classic WO268, Instruction Manual

Page: 42 / 48

Product support
Help is always at hand
Product support
42
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Troubleshooting
If you are experiencing problems with your radio, there are some quick and easy checks
that you can do, which may help to solve the problem.
No sound / power:
Adjust the volume using the rotary control on your radio.
Check that the mains power wall socket is switched on, the power switch on the back of
the radio is On and that your radio is not in Standby mode.
You may have headphones connected. Either use the headphones to listen to your radio
or unplug the headphones.
If you have batteries fitted, they may be exhausted and need to be replaced. Please use
only good quality C size batteries.
Radio reception is poor:
Fully extend the aerial to get the best reception and sound quality.
Retune for radio stations, see pages 22 and 27.
Try moving your radio to another location to see if reception improves.
Check that you do not have other electrical equipment too close to your Radio, causing
interference.
Visit www.digitalradionow.com for information about DAB reception in your area.
The function buttons do not respond:
Check that the mains power wall socket is switched on, the power switch on the back of
the radio is On and that your radio is not in Standby mode.
If you are using batteries, they may be exhausted and need to be replaced.
Unplug the mains power and remove the batteries. Leave the radio for 3 minutes and
then reconnect the power.