background image

DANGER

_age32

In case the

 

vacuum pump

 

conveyed gas that was contaminated

 

with harmful foreign material the oil and the exhaust filter(s) will

 

be contaminated with harmful material.

Harmful material can reside in pores, gaps and internal spaces of

 

the

 

vacuum pump.

Danger to health during dismantling of the

 

vacuum pump.

Danger to the environment.

Prior to shipping the

 

vacuum pump

 

shall be decontaminated as

 

good as possible and the contamination status shall be stated in a

 

“Declaration of Contamination” (form downloadable from

 

www.buschvacuum.com).

Busch service will only accept

 

vacuum pumps

 

that come with a com-

pletely filled in and legally binding signed “Declaration of Contamina-
tion” (form downloadable from www.buschvacuum.com).

Removal from Service

Temporary Removal from Service

Prior to disconnecting pipes/lines make sure that all pipes/lines are
vented to atmospheric pressure

Recommissioning

CAUTION

_a

Vanes (i) can stick after a long period of standstill.

Risk of vane breakage if the vacuum pump is started with the drive
motor.

After longer periods of standstill the vacuum pump shall be turned
by hand.

After longer periods of standstill:

Make sure that the vacuum pump is locked against inadvertent
start up

Remove the cover around the fan of the drive motor

Slowly rotate the fan wheel by hand several revolutions in the
intended direction of rotation (see stuck on or cast arrow (c))

Mount the cover around the fan wheel of the drive motor

If deposits could have gathered in the vacuum pump:

Flush the vacuum pump (

Ú

page 9: Maintenance)

Observe the chapter Installation and Commissioning (

Ú

page 6)

Dismantling and Disposal

DANGER

_age32

In case the vacuum pump conveyed gas that was contaminated
with harmful foreign material the oil and the exhaust filter(s) will
be contaminated with harmful material.

Harmful material can reside in pores, gaps and internal spaces of
the vacuum pump.

Danger to health during dismantling of the vacuum pump.

Danger to the environment.

During dismantling of the vacuum pump personal protective
equipment must be worn.

The vacuum pump must be decontaminated prior to disposal.

Oil and exhaust filters must be disposed of separately in compli-
ance with applicable regulations.

CAUTION

_a

Used oil and used exhaust filters are special waste and must be dis-
posed of in compliance with applicable regulations.

CAUTION

_a1

The filter spring can fly out of the exhaust port during removal.

Risk of eye injury.

Eye protection goggles must be worn while handling filter springs.

Remove the exhaust filter (

Ú

page 12: Exhaust Filter)

Drain the oil

Make sure that materials and components to be treated as special
waste have been separated from the vacuum pump

Make sure that the vacuum pump is not contaminated with harm-
ful foreign material

According to the best knowledge at the time of printing of this manual
the materials used for the manufacture of the vacuum pump involve
no risk.

Dispose of the used oil in compliance with applicable regulations

Dispose of special waste in compliance with applicable regulations

Dispose of the vacuum pump as scrap metal

Removal from Service

RE

 

0016

 

B / RE

 

0040

 

B / RE

 

0063

 

B

 

with safety valve, without motor

0870142823

page 13

Summary of Contents for R5 RE 0016 B

























Reviews: