UK Declaration of Conformity | 15
Instruction Manual Supplement DOLPHIN VL Systems_EN_en
35 | 36
15
UK Declaration of Conformity
This Declaration of Conformity and the UKCA-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Dec-
laration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the UKCA-marking.
The manufacturer
Busch GVT Ltd.
Westmere Drive, Crewe Business Park
Crewe, Cheshire, CW1 6ZD
United Kingdom
declares that the machine: DOLPHIN VL 0100 A; DOLPHIN VL 0130 A; DOLPHIN VL 0170 A; DOLPHIN VL 0180 A; DOLPHIN VL 0220 A; DOLPHIN VL 0270
A; DOLPHIN VL 0320 A; DOLPHIN VL 0430 A; DOLPHIN VL 0510 A; DOLPHIN VL 0530 A; DOLPHIN VL 0630 A; DOLPHIN VL 0750 A; DOLPHIN VL 0800 A
fulfill(s) all the relevant provisions from UK legislations:
– Supply of Machinery (Safety) Regulations 2008
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment Regulations 2021
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards
Title of the Standard
EN ISO 12100 : 2010
Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019
Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009
Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008
Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019
Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
ISO 21940-1 : 2019
Mechanical vibration – Rotor balancing
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Busch GVT Ltd
Westmere Drive, Crewe Business Park
Crewe, Cheshire - UK
Crewe, 16.04.2021
Tracey Sellars, General Director
