Connection and installation
Product manual 2CKA001473B9190
│15
5.4
Installation
Notice
The devices have been prepared for installing in flush-mounted boxes in
connection with the corresponding support ring. The device insert has already
been inserted in the support ring.
To install the device, perform the following steps:
Notice
The sensor must be pulled off the flush-mounted insert before mounting!
1. Turn the device into the correct
installation position [1].
Fig. 6:
Installation position
Notice
Observe correct wiring!
2. Option: Connect the power cable for
external temperature sensor 6226/T
to the top terminal block [1].
3. Connect the 230 V power cord to the
bottom terminal block [2].
Observe
the
Chapter 5.3 “Circuit diagrams“ on
page 14
.
4. Insert the device into the flush-
mounted box and screw it on.
Fig. 7:
Connection and installation
5. Attach the cover to the sensor.
Fig. 8:
Mounting the cover