Parameter Description | 7
0870208958_INVEOR_VFD_-0002_PCI_en
19 / 44
7
Parameter Description
DANGER
Carry out any work on the variable-frequency drive and motor.
Risk of electrical shock!
• Electrical installation work must only be executed by qualified personnel.
NOTICE
Change factory settings.
Risk of damage to the machine!
If wrong or not allowed parameters have been set, Busch disclaims any liability for dam-
age to the machine.
• Change only the allowed parameters described in the chapter
.
NOTICE
Changing of any other parameters than described below.
Risk of damage to the machine!
• Do not change any other parameter than described below.
7.1 Overview I/O Connections
Terminals
Plug terminal clamp with activation button
(slot screwdriver, max. width 2.5 mm)
Connection cross section
0.5 to 1.5 mm
2
, single-wire, AWG 20 to AWG 14
Connection cross section
0.75 to 1.5 mm
2
, fine-wired, AWG 18 to AWG 14
Connection cross section
0.5 to 1.0 mm
2
, fine-wired
(core end sleeves with and without plastic collars)
Length of stripped insulation
9 to 10 mm