Busch+Müller 164, Instruction Manual

Page: 23 / 88

23
IT
ES
NL
FR
EN
DE
WARNING
Do not use the bicycle if the light beam of your headlight
1
is misaligned or the
headlight
1
is too loose.
Only align or tighten the bicycle headlight
1
when the bicycle is not moving. Blinding oncoming
traffic can lead to accidents. Before aligning the bicycle headlight
1
loosen the bracket retaining
screw. Make sure to retighten this screw again after aligning the headlight
1
so that neither the
screw nor the headlight can come loose or move all by themselves.
WARNING
Never look directly into the light of the bicycle headlight
1
when switched on.
6.2. IQ-X E Assembly
Securely attach the headlight
1
to the bicycle using the enclosed Busch + Müller bracket
2
so
that it does not adjust itself, and its position on the bicycle cannot change. This adjustment must
be checked before initial use. If other brackets are used, no guarantee can be given for secure
attachment. Never mount on the fork leg or on conical components.
Mounting example fork crown: First loosen the existing screw on the fork crown of your bicycle.
Insert this screw through the screw hole provided at the lower end of the Busch + Müller bracket
2
and then tighten it again to ensure the the headlight
1
cannot come loose or move all by
itself.