Busch-Jaeger WaveLINE 6721, Installation And Operating Instructions Manual

Page: 28 / 108

Start-up ENG 28
12 Start-up
The device has two channels. One channel for the internal
magnet contact and one channel for an external contact.
The two channels are evaluated independently.
Operation with the internal contact only
1. Set the receiver (e.g. WaveLINE LED display) to the
programming mode (position P).
2. The magnet contact has already been activated at the
factory (switch 1, Fig. 3 Pos. 1). After the insertion of
the battery, the programming signal is transmitted and
the device is ready.
3. Reset the receiver to the operating mode.