Connection, installation / mounting
Product manual 2CKA001473B8724
│
14
6.2
Mounting
Caution! The device can sustain damage when coming into contact with
hard objects!
The plastic parts of the device are sensitive.
– Pull the attachment off only with your hands.
– Do not lever parts off with screwdrivers or similar hard objects.
The flush-mounted insert must only be installed in flush-mounted wall boxes according to DIN
49073-1, Part 1, or suitable surface-mounted housings.
To mount the device, perform the following steps:
1. Pull the attachment off.
– If the device is already mounted
or assembled, pull off the
attachment from the flush-
mounted insert with the aid of the
frame.
Fig. 1:
Wall mounting: pulling off the attachment
– If the state of the device is at the
point of delivery, pull off the
attachment from the flush-
mounted insert with your hands.
– Pull the attachment off only with
your hands!
– Do not lever parts off with
screwdrivers or similar hard
objects. This damages the
device.
– When pulling off, first the
resistance of the spring clamps
must be overcome.
Fig. 2:
State of the device at the point of delivery:
pulling off the attachment
