5
16
Connection of the remote control:
Status messages of the system
If you want to use another remote control with the hands-free set which was
originally not included in the scope of delivery (e.g. a replacement remote control),
you first of all have to connect it with the hands-free set. Please proceed as
follows:
If the Bluetooth connection between the mobile phone and the hands-free set is not
yet established and if you start the dialog by pressing the VoiceDial key shortly, you
hear 2 beeps. If a Bluetooth connection is active you only hear 1 beep after pressing
the key VoiceDial key. Certain functions and dialogs are only possible depending on
the status of the hands-free set (Bluetooth connection active / not active).
1. Turn the ignition on.
2. Remove batteries from the new remote control.
3. Turn the ignition off.
4. Now please press the VoiceDial key at the remote control and keep on pressing
the key.
5. Reinsert the battery in the box of the remote control.
6. If the remote control has been successfully connected, the hands-free set
makes three beeps. Stop then pressing the VoiceDial key.
7. Turn the ignition on and test the hands-free set.
5
6
7
0123456789
0_100_23_400__56...
8
0123_4567_8901
0__123_456_7_8_9
Summary of Contents for VoiceTalk BT
Page 2: ......
