Burstner Ixeo Time IT 590, Instruction Manual

Page: 98 / 274

98
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Living
6
Safety net The three safety nets (Fig. 125,2) with their retaining belts are located under-
neath the mattress in the pull-down bed. Only use the safety nets if persons
are already in the pull-down bed.
Setting up:
„
Attach retaining belts (Fig. 125,1) to the hooks on the ceiling.
Access ladder If the pull-down bed is raised over 1 m, only access the pull-down bed using
the access ladder provided.
Attaching:
„
Hook both bows (Fig. 125,4) of the access ladder (Fig. 125,5) into the
holders (Fig. 125,3).
Storing away:
„
Release the access ladder (Fig. 125,5) from the holders (Fig. 125,3).
„
Store the access ladder securely.
Emergency operation If it is no longer possible to move the pull-down bed with the arrow keys
(Fig. 124,1 and 4), first of all check the fuse in the front wall-mounted cupboard
on the left-hand side of the vehicle or at Reserve 3 on the transformer/rectifier
(see section 8.9.1). If the fuse is okay and it is still not possible to move the
pull-down bed, the pull-down bed can be operated manually.
„
If present, remove the cover from the access opening (Fig. 127,1 or
Fig. 128,1).
Fig. 125 Pull-down bed complete with
applied safety net
Fig. 126 Pull-down bed, completely low-
ered (dependent on model)
Z
If the pull-down bed is lowered below 1 m (Fig. 126), it will not be possible
to set up the safety nets.
Fig. 127 Access to drive Fig. 128 Access to drive (alternative)