Burstner Ixeo Time IT 590, Instruction Manual

Page: 87 / 274

87
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Living
6
The tables' main operation is described below. The type and position of the
operating controls may vary slightly.
6.13.1 Fixed table
Table leg The table leg is screwed into the floor.
The fixed table cannot be used as a bed foundation.
Adjusting the table top Depending on the model, the table top can be rotated, moved or extended.
Rotating the table top:
„
Rotate table top to the desired position. In order to do this, you need a little
effort, because the table top rotates against the friction resistance on the
pillar table leg.
Moving the table top:
„
Fold lever (Fig. 108,1) downward.
„
Move the table top to the desired position.
„
Fold the lever back upwards.
Expanding the table:
„
Pull the knob (Fig. 109,3) of the lock down and swing out the table exten-
sion (Fig. 109,2).
Reducing the table size:
„
Swing the table extension (Fig. 109,2) under the table top (Fig. 109,1) until
the lock latches in place audibly.
Z
Depending on the model, the tables can be adjusted in one or more of the
aforementioned ways.
Fig. 108 Unlocking of the table top Fig. 109 Swing-out table extension