Burstner Ixeo Time IT 590, Instruction Manual

Page: 41 / 274

41
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
During the journey
4
4.8 ISOFIX child safety seat mounting system (special
equipment)
If the vehicle is equipped with the ISOFIX child safety seat mounting system,
the vehicle seats suitable for it are marked with the ISOFIX symbol. These
vehicle seats have retaining brackets (Fig. 25,2) and another anchorage point
at the top of the seat backrest (Top Tether) (Fig. 25,1). Use child restraint
system suitable for ISOFIX. The child restraint systems possess connectors
which are latched to the retaining brackets of the vehicle seat.
The bench with the special equipment ISOFIX child safety seat mounting
system is suitable for child seats with ISOFIX system, which are specially
authorised for this vehicle type according to the standard ECE-R 44.
Child restraint systems of the groups 0, 0+, and 1 with ISOFIX child safety seat
mounting system can be fastened at the ISOFIX anchorage points on the
bench.
Fastening a child seat
„
Push the connectors of the child seat into the ISOFIX anchorage points
until they engage audibly.
„
By pulling the child seat, check whether both sides have engaged correctly.
„
If possible, fasten the child seat at the Top Tether (Fig. 25,1).
Fig. 25 ISOFIX child safety seat
mounting system
Z
Also observe the instruction manual of the child restraint system manufac-
turer.