Burstner Ixeo Time IT 590, Instruction Manual

Page: 180 / 274

180
T-Modell - 17/18 - Ausgabe 09/17 - 2891569 - BUE-0029-19EN
Appliances
9
Operation
Switching on:
„
Press the On/Off button (Fig. 227,4). The operating indicator (Fig. 227,3)
lights up in blue. The refrigerator is switched on, the LCD display shows the
last settings selected. The display lighting goes out after 10 seconds.
Selecting the energy
source:
„
Manual power selection: use the Operating mode button (Fig. 227,1) to
select the desired energy source. The LCD display shows the selected
operating mode. The display goes out after 10 seconds.
„
Automatic power selection: use the Operating mode button (Fig. 227,1) to
select the AUTO function. The LCD display shows the AUTO function and
the current operating mode. The display lighting goes out after 10 seconds.
The automatic power selection is carried out in the following order as a func-
tion of the availability of the energy sources:
z
230 V AC
z
12 V DC
z
Gas
Setting the refrigerating
temperature:
„
Set the desired cooling level by pressing the Cooling level button
(Fig. 227,5). The LCD display shows the selected cooling power. The dis-
play lighting goes out after 10 seconds.
Switching off:
„
Press the On/Off button (Fig. 227,4).
„
If the refrigerator had been operated with gas: Close the gas isolator tap
"Refrigerator" and the main tap on the gas bottle.
Additional functions If there is a fault present, the operating indicator (Fig. 227,3) next to the On/
Off button (Fig. 227,4) will flash. In addition, an error code appears on the dis-
play (Fig. 227,2). For instructions on troubleshooting, see chapter 14.
Fig. 227 Thetford N97 refrigerator
1 Operating mode button
2 Display
3 Operating indicator (blue LED)
4 On/Off button
5 Cooling level button
Z
If the refrigerator shall be operated with gas: Open the regulator tap on the
gas bottle and the gas isolator tap "Refrigerator".
Z
Further information can be obtained from the separate instruction manual
"Refrigerator".