Burstner CityCar 2016, Instruction Manual

Page: 64 / 150

64
City-Car - 15/16 - Ausgabe 12/15 - 2616861 - BUE-0090-00EN
Gas system
7
„
Connect the filled gas bottle to the gas tube.
„
Open the regulator tap on the gas bottle.
„
Press the green button of the hose break guard (Fig. 35,1).
7.4 Changing gas bottles
„
Open flap for the gas bottle compartment.
„
Close the regulator tap (Fig. 38,4) on the gas bottle. Pay attention to the
direction of the arrow.
„
Hold the gas pressure regulator (Fig. 38,2) and open the knurled nut
(Fig. 38,3).
„
Remove the gas pressure regulator and the gas tube (Fig. 38,1) from the
gas bottle.
„
Release the fixing belts and remove the gas bottle.
„
Place a filled gas bottle in the gas bottle compartment.
„
Fix gas bottle in place with the fixing belts.
„
Position the gas pressure regulator (Fig. 38,2) and the gas tube (Fig. 38,1)
on the gas bottle and tighten the knurled nut (Fig. 38,3) by hand.
„
Close flap for the gas bottle compartment.
X
If the vehicle is equipped with a DuoControl regulating system, change
the gas bottles according to the instructions in section 7.3.
X
When changing gas bottles, do not smoke or create any open fire.
X
When you have changed the gas bottle, check whether gas escapes at
the connection points and unions. Use a leakage search spray to spray
the relevant connection point or union. These agents are available at the
accessories shop.
Fig. 38 Gas bottle connection