The Initial Powering up
Make sure volume control has been turned to minimal when using your Play for the first time. Always
power on your source machine first and your power amp last. When powering down your system
reverse the steps.
Free Warranty Extension
All Burson Audio products are covered by 24 months of warranty (See conditions below). You can
extend the warranty to 5 years by register your Play unit on our warranty page:
https://www.bursonaudio.com/warranty/
.
Warranty Conditions
Burson Audio warrants that this product shall be free from defects in materials and workmanship for:
The warranty period begins at the date of sale and is subject to the following requirements and
understandings:
1. This is a non-transferable warranty.
2. This product is only warranted in the country of original sale by Burson / authorised dealer.
3. The product must not have been modified in any manner whatsoever, or the warranty is
immediately voided.
4. The product must not have been stored in a humid, damp environment; nor subjected to
weather, water, or salt spray.
5. During the warranty period Burson will replace a defective Burson Play with a similar
available product, at no cost to the owner for labour, materials, and shipping charges from
Burson.
6. Burson shall not, under any circumstances, be liable for any incidental or consequential
damages arising from the loss of property or other damage or losses due to the failure of a
Burson Play. Burson will not pay for loss of use or inconvenience caused by the failure of a
Burson Play. Burson will not pay for damage caused to other audio components caused by the
failure of the Burson Play within the limits allowed by Australian Law.
7. The compatibility between our USB receiver and your computer is dependent on software
drivers provided to Burson by the USB chip manufacturer. Therefore Burson cannot
guarantee compatibility of our USB receiver during or after the warranty period.
