21.
DO NOT USE STONE WHEELS
• The use of stone or vitreous wheels on any Burr King grinder is prohibited. The machine guarding and dust scoops if
equipped are not suitable for these types of wheels. To do so will create an operator safety hazard.
22.
ROTATIONAL SPEED WARNING, CONTACT WHEELS
Users are warned not to exceed the below listed revolutions per minute (RPM) on wheels. Failure to heed this warning
may lead to de-bonding, fragmentation, or other mechanical failure. Such failures may cause serious personal injury to
operators or bystanders, and/or cause property damage. All Burr King products are warranted for various time periods to
be free of material and/or workmanship defects. Burr King Manufacturing Companies standard warranty policy is
summarized as follows for contact wheels. 1 year from date of purchase if mounted on a Burr King machine purchased on
the same date or 90 days if purchased as a spare or replacement part. Our warranty does not apply to wheels that are
mounted on products not manufactured by Burr King Manufacturing Company, Inc.
Remember good safety practice demands guarding to protect operators and bystanders from wheel failure and/or debris.
Never use the subject contact wheels without proper guarding that meets commonly accepted safe practice. See OSHA,
U/L, CSA, CE, ISO and other respected
safety standards.
23.
OCCUPATIONAL NOISE EXPOSURE
Burr King products produce levels of noise consistent with their intended purposes. The level and spectral content of noise
produced is dependent on the product type, the degree that the product is maintained in proper operating condition, the
abrasive/media and accessories used, the specific application, and the surrounding environment. Noise levels produced by
various Burr King grinders and polishers, as measured at the Burr King factory, range from 80 to 93 decibels. Product
operators and persons in the immediate product vicinity should be protected from excessive noise levels as prescribed in
OSHA regulation 29, piece 1910.95 titled “Occupational Noise Exposure”.
ROTATING EQUIPMENT CAN BE DANGEROUS TO OPERATORS AND THOSE WHO MAY BE
IN ITS IMMEDIATE OPERATING VICINITY. IT IS THE ABSOLUTE AND DIRECT
RESPONSIBILITY OF PURCHASERS, MANAGERS, AND OPERATORS OF THIS EQUIPMENT
TO UNDERSTAND AND OBEY THE FOREGOING MINIMUM OPERATING SAFETY
REQUIREMENTS.
IF
YOU HAVE QUESTIONS OR SAFETY CONCERNS REGARDING
OPERATING THE SUBJECT EQUIPMENT PLEASE CALL YOUR AUTHORIZED BURR KING
DISTRIBUTOR, OR BURR KING MANUFACTURING AT 660-438-8998. YOUR SAFETY IS OUR
FOREMOST CONCERN!
Burr King Manufacturing disclaims any and all responsibility for injuries, damage, loss of income, or
other adverse consequence as might be incurred by purchasers, managers, and operators of this
equipment.
24.
TRAINING
• Do train operators and others in safe operating practices
• Post these instructions so they are available for future reference and new operators.
Page 8
