Installation
page
4
Inserting your SIM card
Note: Ensure that the unit is switched off before inserting your SIM
card. Insertion is most easily achieved with the unit carefully placed
upside down.
To insert your SIM card
1 Use a thin object to press
the tray eject button. Fully
remove the tray.
Phone
Lin
e
Phone
Line
Connecting a telephone
The Burnside unit can be used with a touchtone corded phone, a
cordless DECT phone base station or a private branch exchange
(PBX), as required.
To connect a telephone
1 Connect the supplied cable adapter to the socket on the rear
panel, labelled ‘Phone’.
Note: Your phone may have a connector that fits directly into the
‘Phone’ socket, in which case the adapter is not needed.
Phone
Line
Cable adapter
Phone
connector
2 Place the SIM card into the
tray so that the contacts are
facing up.
3 Slide the tray back into the
slot and press it all the way in.
2 Connect your phone (or PBX) to the cable adapter.
SIM and Terminal PIN codes
The Burnside unit has its own Terminal PIN code which is different
from the PIN code used by the SIM card. The Terminal PIN is used
for certain control menu options and security procedures related
directly to the unit rather than the SIM card.
