Burnside P300, Quick Start Manual

Page: 3 / 6

INSTALLATION
Thank you for choosing this Burnside P300 No-Button GSM phone. This guide will
help you set up and begin using your phone and its features. Before you use your
new phone, please review the important safety information provided on the back
page of this guide. Then follow the steps below.
QuickStart Guide QuickStart Guide QuickStart Guide QuickStart Guide
STEP 1 - Unlock the transit switch
When shipped, your phone is locked, to prevent
it from powering on accidentally. You need to
unlock the phone before it will operate. On the
underside of the phone unit, locate the recessed
switch near to where the handset cable attaches.
Slide the switch towards the rear of the phone unit.
(The phone will not switch on at this stage.)
Loc
ked
position
Unloc
ked
position
Transit switch
STEP 2 - Insert your SIM card
Note: Ensure the phone is switched off when inserting or removing a SIM card.
Your phone requires an active mobile 2G SIM card for normal use. It will not work
with 3G networks. Without a SIM card installed, the phone will only be able to make
emergency calls via the 112 code, if a mobile network signal is available.
Make sure the SIM is not locked. Most typical SIMs are supplied unlocked, but if it is
locked, unlock it using a phone that has a keypad.
On the rear panel of the phone unit, carefully
swing open the SIM slot door.
Position your SIM card with its contacts facing
downwards and the notched corner facing
towards the slot.
Push the SIM card into the slot until it clicks into
place. Close the door.
Note: To remove the SIM card, press it inwards to release and
partially eject it, then carefully pull it out of the slot.
Page 8 Page 8 Page 8 Page 8 Page 1 Page 1 Page 1 Page 1
USER INFORMATION AND NOTES
IMEI Number
Phone Number
Phone PIN
SIM PUK Number
Customer registration number
1
MoniCare® access code 2
1
As soon as you have prepared your phone for use, you should register it with
Burnside. Registration ensures that you have access to Burnside's online resources,
including documentation, technical support and news. When you register, you are
given a unique customer registration number, which should be quoted in any
contact with Burnside about your phone.
2 MoniCare® is Burnside's Web-based software that enables you to monitor and
configure your phone from anywhere, using a standard Web browser on a desktop
or laptop computer, or your smartphone. Visit the Burnside Web site at
www.burnsidetelecom.com
www.burnsidetelecom.com www.burnsidetelecom.com
www.burnsidetelecom.com to learn more and to get in touch with our team.