BURNiT Pell Easy 20, Installation And Operation Manual

Page: 23 / 48

23
TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL TECHNICAL PASSPORT. INSTALLATION and OPERATION MANUAL
9 .2. Important recommendations for
long-lasting and correct operation of the
boiler
- For assembly and installation of the
boiler follow the requirements in this
manual.
- Use only recommended in this manual
fuel.
- Use only recommended in this manual
Combustion chamber before clean it.
Depending on fuel and burner settings,
clean the pellet burner once a week.
- User`s training for operation and
maintenance of boiler is performed by
an authorized installer or service shop.

Failure to observe the installation
and operating requirements
described in the manual and
the service booklet voids the
warranty.
9.3. Requirements for the cleaning and
maintenance of Pell Easy pellet boiler.
Attention! Important instructions
regarding cleaning of boiler

Caution! Hot surfaces.
Before cleaning the boiler, make
sure the fire in it has died out and
the boiler has cooled down.
Cleaning the ash from the ash container
once a week is a must. It is done by
removing the two wing nuts, laying on
the both sides of the ash container. Pull
the ash container and clean it. After
it is empty and clean, make sure it is
positioned well and screw up the wing
nuts again. Clamp them manually till it’s
not possible anymore..
Diagram 9
It is mandatory cleaning combustion
chamber of the burner fnce every 2-3 dat
to once week, depending on the use an
the fuel type.
Diagram 10

Attention! Cleaning and
maintenance of the boiler
should be carried out only by
an authorised installer/service
shop.
Before the start of the heating season
it is mandatory to check and clean the
following components of the boiler: