The Contractors Choice
thermOweld
®
ECN 2552 REV "D" 03/06/13 34-5381-83
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - ABR-1 TYPE MOLDS
ABR-1
Place receptacle and ground rod into the mold. The ground rod
should be touching the receptacle. Besure ground receptacle is
seated and that the ground rod is not holding it up from the mold.
Next insert bus bar until it butts against the side of the ground
rod. Use a pair of locking pliers or a clamp to prevent mold from
slipping when fired.
