connecting the LouDspeAkers
Ambience 31 Operating Manual
17
5.7
Bi-amping with mono power amplifiers
Mono power amplifiers make it possible to combine the advantages of vertical and
horizontal bi-amping: short cable lengths and decoupling the mid-range/tweeter
amplifiers from the bass range. Four mono amplifiers are required for this option.
R
L
+
–
+
–
+
–
+
–
1.
1.
1.
1.
4.
4.
4.
4.
3.
3.
2.
2.
Connecting the speakers:
1.
Position two mono power amplifiers near each of the two speakers.
2.
Connect the preamplifier to the mono power amplifiers as shown above. You will
need two optional Burmester bi-amp adapters or adapter cables. Please contact
your specialist dealer for assistance.
3.
On the speaker connector panel, remove the bi-wiring jumpers between the woofer
terminals (LOW) and the tweeter/mid-range terminals (HI/MID) located above them.
4.
Separately connect the woofer and mid-range/tweeter units of each speaker to the
mono amplifier outputs.
Summary of Contents for AMBIENCE 31
Page 1: ...A M B I E N C E 3 1 Operating Manual...
Page 2: ......