hoW to ConneCt the MusiCCenter to A netWork?
151 Musiccenter
11
How to connect the Musiccenter to a Network?
A network connection is required for internet access as well as for networking
the Musiccenter with other devices. This offers the following additional functions:
• Calling up album information from the Internet during ripping.
• Choose between a multitude Internet radio stations.
• Stream musical content from providers such as TIDAL (subject to a fee).
• Downloading music from providers such as HIGHRESAUDIO (subject to a fee).
• Receiving messages, for example on software updates.
• Performing a software update via the Internet.
Detailed information on how to perform these functions can be found in the separate
manuals „
User Guide for Operation via the iPad® App
“ and „
User Guide for Operation
via a Web browser
“.
There are two ways to connect the Musiccenter to a network:
• Using an Ethernet cable
• Using a Wi-Fi connection
Establishing a network connection with an Ethernet cable
Router
1.
Connect the Musiccenter to your router using an Ethernet cable.
2.
On the remote control, press the
OSD
button, then the buttons
7 – 8 – 9
.
ª
All LEDs on the device light up in
orange
(see page 8).
3.
Press number button
0
and then the
OK
key.
ª
During the switching process, the
NETWORK
LED on the device flashes
red
.
ª
After switching the
NETWORK
LED lights up in
orange
, when the device is
connected to the network. The color changes to
green
when the device is
connected to the internet.
note:
If you have issues with the network connection, you can also contact your Burmester
dealer, who would be happy to help you during installation.