8
PRECAUTIONS
Terminals
The pins of the connecting terminals on the back panel should not be touched by fingers
under any circumstances. Static discharges may damage the electronic circuitry inside the
unit.
CAUTION: During operation the speaker terminals of the 2-channel power amp 036
carry high voltage. Therefore, it is strictly prohibited to touch these terminals during
operation.
Heat development
Be careful by touching your component, because the housing becomes warm during
operation.
Reset
If the 036 does not react when control keys are pushed it must be reset by switching it off
and back on using the AC mains switch on the back panel.
Lightning strikes
During the summer month, malfunctions often occur due to voltage spikes in the power
lines after lightning strikes. Completely unplugging the power cord offers the only effective
protection. Merely switching the 036 off using the AC mains switch does not suffice since
voltage spikes are able to arc over separated contacts.
Interconnects
We supply custom-made balanced as well as unbalanced interconnect cables and speaker
cables of any length to ensure highest-quality signal paths for our components. The
impedance of our cables is ideally matched to all Burmester components.
For the cleanest power supply we recommend our triple-shielded power cord BURMESTER-
POWER.
Fuses
The fuse are located inside the unit and should be changed by a qualified technician only.
Voltage selection
The bridge for selecting the correct voltage is located inside the housing. If the voltage
setting needs to be changed, we recommend contacting your dealer.
Cleaning
Only use a humid or dry cloth to clean the housing. Never use a wet cloth or chemical
liquids to clean the housing.
CAUTION:
Before opening the unit please disconnect the AC cord.
