A
2 - 2
5
3
24H
●
If you have a waste that comes up through the floor, you can connect to it
with a flexible drain pipe which enables you to tilt the bath up and move the
bath into the required position. To avoid water retention in the trap
the flexible pipe should have a continuous downward flow.
●
Place the bath on two wooden blocks over the waste connections.
●
Connect the waste. Fill the bath with water and check for leakage.
●
Securing your bath to the floor!!!
When the bath is in position and the installation is complete, It is recommended
that you apply a bead of clear silicone sealant around the bottom of the bath to
secure it to the floor.
●
Should maintenance access be needed the silicone can be released by cutting
round it with a sharp knife.
4
