UŽÍVATEĽSKÝ MANUÁL MIEŠAČOV - MODELY R6208A, R6208B, R6208C
Strana 14 z 17
tools.
These instructions must be kept in a safe place. You will also find other safety instructions in the
accompanying booklets.
_ The equipment must never be used in surroundings where an explosive atmosphere exists. Never mix in
solvents or substances containing solvent that have flash points below
21°C.
_ Do not let the cable touch any parts of your body.
_ Only use the extension cable approved for use in the working area.
_ The unit must only be started and stopped when it is inside a mixing vessel. Ensure that the mixing vessel is
placed on a solid, secure base.
_ Never reach into the mixing vessel with your hands or any other object during the mixing process.
_ We recommend that you always wear industrial safety gloves and safety goggles when working with the
mixer.
_ Wearing close-fitting clothes is mandatory.
_ Always allow for reaction torque
_ Always wear a dust mask
6. HOW TO USE THE MIXER
Before setting up, repair or maintenance of the appliance you must always turn off
the operating switch and pull out the mains plug!
Before Initial Operation
- Check if the rated frequency of the mains supply corresponds to the details of the type place.
- Before using the tool, read the instruction book carefully.
Mixer Assembly (Fig. 2):
First screw mixer part (6a) together with mixer part (6b). Screw the mixer (6) into the mixer holder (5)
afterwards. Use the two spanners to do this. Use one of the spanners (a) to hold the mixer holder (5) in place
and then use the second spanner (b) to tighten up the mixer (6). Proceed in the reverse sequence to undo the
mixer.
Starting the Unit
Ensure that the data listed on the nameplate concurs with the mains voltage before connecting the unit up.
