05
Operation
WARNING!
Heating sockets are available in different diameters! Always use the
correct heating socket according to
the intended use! Observe the
technical re
quirements of this product (see section "Technical
specifications") when purchasing and using heating sockets!
NOTICE!
Socket becomes hot during use! Wear protective gloves during using in
order to avoid injuries like burns!
Heating sockets
Installation
②
- Put the machine on stand(E).
- Align heating socket(F) on both sides of heating element(D). Screw the heating
socket(F) clockwise on the heating element(D).
- Fix the heating socket(F) with screw(I), tighten it by clockwise.
Removing/Placing
②
- Loosen the screw(I) with the wrench(G), remove the heating socket(F), if change to
another pair of heating socket(F), repeat the mentioned above steps.
Thermostat knob
③
WARNING!
Make sure the thermostat knob(B) is in its "0" position and disconnect it from
power supply before making any adjustments.
>
Turn the thermostat knob
(B) anticlockwise (as seen from operators position) to
increase the maximum temperature.
> Turn the thermostat knob (B) clockwise (as seen from operators position) to
decrease the maximum temperature.
Indicator
③
> Turn the thermostat knob (B) clockwise (as seen from operators position)
to decrease the maximum temperature.
> After reached to required temperature, the red indicator turned off.
