Page 11 of 20
Door Handle Assembly
Door Handle Adjustment
There is a CAM and LOBE mechanism which allows the handle to be moved up and down or in
and out. If required, adjust the handle so it lines up and engages correctly with the stud in the side
of the stove. Incorrect alignment will put excessive force on the door hinges and may result in a
poor seal between the door and the stove. The door may require adjustment as the rope seal
compresses. A 5mm Allen key will be required.
The Door handle is pre-assembled and fitted to your stove. The information below is for reference
only.
The door handle and parts must be fitted as per the assembly diagram below. (Please note it is
very important to fit the parts in the correct sequence).
The socket screw may be tightened up using the Allen key provided in the ‘thank you’ kit.
Air Lever Assembly
The air lever is factory fitted.
Levers and Handles
Please ensure that all levers and handles move correctly prior to positioning the stove in the
opening or on the hearth. Adjustment may prove difficult once the stove is positioned.
