background image

1

 

 

2

Image 5: Use the provided solid core 
wire to wrap around the cables and pass 
through from the rear of the chassis to 
the front.

Image 7: Pull the cables towards the 
front of the unit.

Image 6: When installing the BAD4M 
into the B80 Chassis, make sure the 
metal Daughter Card backplate (not the 
PCB) is inserted into the card guides. 
(BDA4M shown here)

Image 8: Attach the 4-pin connectors 
(1/2 is on the top, 3/4 is on the bottom) 
and the ribbon cable to the front panel. 
Attach the front panel to the chassis us-
ing two thumb screws. 

Image 9: With the B16 cover removed, 
install the BAD4M into the card guides as 
shown (BDA4M shown here). Make sure 
the metal Daughter Card backplate, not 
PCB, is inserted into the card guides. 

Image 10: Pull the cables through to the 

front of the chassis. Attach the 4-pin 
connectors (1/2 is on the left, 3/4 is on 
the right) and the ribbon cable to the 
front panel. Attach the front panel to the 
chassis using two thumb screws. 

Installing B80 Mothership Daughter Cards

Installing B16 Mothership Daughter Cards

*NOTE- See B80 Mothership Quick Start Guide for more information

*NOTE- See B16 Mothership Quick Start Guide for more information

Reviews: