Bürkert eCONTROL 8611, Quick Start Manual, Page: 17 / 142

17
ElectricalInstallation
8. electrical installation
8.1. electrical installation for fitting
assembly, wall assembly, valve
assembly or rail assembly
models
8.1.1. connection versions
Connector
Connector
view
Configuration
Circular
plug-in
connector
M12,
8-pole
5
4
3
2 1
8
7
6
Power supply voltage,
set-point input 4 - 20 mA / 0 - 10 V,
process actual value or position set-
point output 4 - 20 mA / 0 - 10 V,
binary input,
binary output
note!
A straight plug (female) is recom-
mended for the connecting cable, as
the alignment of the plug can vary.
Circular
plug-in
connector
M8, 3-pole
4
3 1
Connection sensor
(4 - 20 mA / 0 - 10 V, Pt 100 or
frequency)
and sensor supply 24 V DC
Connector
Connector
view
Configuration
Circular
plug-in
connector
M8, 4-pole
2
1
4
3
Connection actuating element
• Proportional valve (1 x PWM)
• Process valve (1 x PTM)
• Manipulated variable 4 - 20 mA /
0 - 10 V and sensor supply 24 V DC
(only ID 182383)
DIN-EN
175301
1 2
Connection for direct assembly on
proportional valve (1 x PWM) or
open/closed valve (1 x PTM)
Tab. 4: Connection versions for assembly on flow-rate fitting, wall
assembly, rail assembly or valve assembly
english
Type 8611