Bürkert 8619 multiCELL WM AC, Operating Instructions Manual, Page: 100 / 194

I. CONFIGURING THE PID FUNCTION
Refer to section 8.9 to access the Parameters menu.
Parameters Functions F1...F12:
PID
Setup
PV
SP Type:
M0:MAIN
internal
external
Mx:
...
1)
PV range PV-:
PV+:
ENTERING
ENTERING
Reg type: Mode:
Low:
High:
Linear
non-linear
ENTERING
ENTERING
3)
This is
when the
device is be-
ing parame-
tered............
....................
This is
when the
device is be-
ing parame-
tered............
....................
CMD Direction Channel 1/2 Rise
Fall
Channel: Mono
Dual
Advanced
SP: M0:MAIN
Mx:
...
1)
2)
See page 103
.
.
.
1)
The choices offered depend on the modules fitted and/or the options activated. See section 8.10.4 Consulting and/or
activating the available software options and section 8.16 Process inputs or values or process value network.
2)
This function is present if "SP Type" = "external"
3)
These functions are present if "Reg. Type Mode" = "non-linear"
100
Adjustmentandcommissioning
Type 8619
English