Burkert ProcessViewDisplay ME61, Operating Instructions Manual, Page: 16 / 24

16
Start-up with Bürkert Communicator
ME61
8.1.1 Connecting the device to the Bürkert Communicator
The Bürkert Communicator can be connected to the device via a büs network or with the büS stick.
→
Install Bürkert Communicator on the PC.
→
Use the USB-büS-interface to establish the connection between the device and the PC.
Not required for the devices in a büS network.
→
Start Bürkert Communicator.
→
In the menu bar,
click the icon for
Add interface
.
→
Select
büS stick or büS via network .
→
Complete
.
The device is connected to the Bürkert Communicator and is displayed in the navigation area.
8.2 Configuration of views
→
Form a connection to the Bürkert Communicator software.
See chapter “8.1.1 Connecting the device to the Bürkert Communicator”
→
Select
- büS
in the navigation area.
→
Select Detailed view Network configuration .
Image 9: Network configuration
→
Parameterise the inputs and outputs via drag-and-drop.
Compatible connection points are highlighted in blue.
Dotted connections have not yet established an active connection between the devices.
→
The “Adjust parameters” window opens.
→
Input the name that should be shown on the display or select the displayed unit and confirm with
Save
.
English